Communcation Command Console

Communication Command Console

Function

The Communication Command Console allows SEAPRO to set up temporary communications in a remote location.

Specifications

Manufacture Sixty North Electronics Model SP Console
VHF radios ICOM IC-M127
Motorola Radius M1225 (company band radio)
UHF radios Motorola Radius M1225
Ground to air radios ICOM IC-A12252 Power requirements 115V AC or 12V DC
Dimensions L x W x H (in) 24.5" x 15" x 13" Weight (lbs) 60
Ancilary equipment 1 UHF Antenna or UHF Yagi Antenna, 2 VHF Antenna, 1 Ground to Air Antenna (all antennas found in antenna case for Command Console; power cable for AC power (2.5 kW portable generator), power cable for DC power, 32 ft. antenna mast, 6 guy lines for mast, 2 guy rings, antenna cables for Marine VHF, VHF (company band radio), UHF, Ground to Air. Additionally a tool kit is included into the Command Console Kit
Limitations Radio communications will not be possible from the Command Console if the target area being reached is blocked by natural formation (mountain). It will be necessary to set up a radio repeater to allow communications to be extended (See Portable Repeaters).

Transportation Modes

C-130 DC-6 DC-3 737 Beaver Otter Cessna 206 Cessna 185 Heli Barge Tug (only) Lrg F/V Sm F/V Pickup
check mark check mark check mark check mark check mark check mark check mark check mark check mark check mark check mark check mark check mark check mark

Locations & Quantities

Zone 1
Ketchikan

57°06'53.48"N 135°23'31.89"W

(1)
SEAPRO Office