Air Monitor - Dräger CMS

Dräger CMS Air Monitor


Dräger CMS Air Monitor is used to perform initial site characterization of a spill to identify hazardous atmospheric conditions prior to initiating response actions. The Dräger CMS Air Monitor will allow for continual air monitoring to be performed during response actions to insure the safety of the responders.

Chips stocked: Anhydrous Ammonia (NH³), Oxygen (O²), Clorine (CI), Petroleum Hydrocarbons (VOC), Benzene (C6H6), Hydrogen Sulfide (H²S)


Manufacture Dräger Model CMS
Size (L x W x H) 8" x 3.6" x 1.7" Weight (lbs) 1.6 lbs
Detector Detection of particular vapors or gases depends to the analyzing chip used. Optics and light-transfer system reflective measurement for chips. Battery power Operating Time of approximately 450 minutes.
4 x 1.5V batteries of the following type:
Energizer LR 6 E 91 alkaline/Foil (PMBC)
Operating environment 32°F to 104°F (0°C to 40°C) Limitations Unit

Transportation Modes

C-130 DC-6 DC-3 737 Beaver Otter Cessna 206 Cessna 185 Heli Barge Tug (only) Lrg F/V Sm F/V Pickup

Locations & Quantities

Zone 1
55°20'37.51"N 131°39'02.49"W